
In this article
Some home jobs are fine to do yourself or hand to a handyman. Others legally have to be done by a licensed or registered tradesperson, and getting it wrong can mean safety risks, fines, insurance problems and work that has to be pulled out and redone. The rules are set by each state and territory, so the answer depends on where you live.
This guide summarises the main rules in each state and territory and where to check a tradie's licence. Rules and thresholds change, so always confirm with the regulator listed before work starts.
When do electrical, plumbing and gas jobs need a licence?
Hire an appropriately licensed person for electrical wiring, regulated plumbing or drainage, and gasfitting. A small bill doesn’t exempt regulated work. Replacing a power point, connecting a gas cooktop or relocating a drain are examples. Some jurisdictions allow very minor plumbing tasks without a licence, such as changing a tap washer in Tasmania. Check the rules for your exact job.
The reason is simple: mistakes in these trades can cause electrocution, fire, gas leaks, contaminated water and serious property damage, and they're often hidden inside walls where nobody sees them until something goes wrong. Ask what compliance certificate your state or territory requires for the job and keep a copy. For example, Victoria requires a Certificate of Electrical Safety for electrical installation work.
Building work: it depends on the state
For general building work, such as renovations, extensions, carpentry and structural work, each state sets its own rules. Some use a dollar threshold, some use whether the work needs a permit, and some use the type of work. Here's how each one works.
Victoria
In Victoria, most domestic building jobs over $10,000, including labour and materials, need a registered builder and a major domestic building contract. Reblocking, restumping, demolishing or removing a home can require registration regardless of cost. Some jobs involving only one trade, such as painting or plastering alone, are exceptions. Check the current contract rules before signing, as Victorian reforms are due by 1 December 2026.
Check a licence: Use the Building and Plumbing Commission practitioner search for builders and plumbers. Use the Energy Safe Victoria registers for electrical work.
New South Wales
Building Commission NSW regulates residential building work. A licence is required for residential building work valued at more than $5,000 (including GST) in labour and materials, and for all "specialist work" regardless of cost. Specialist work includes electrical wiring, plumbing, drainage, gasfitting, and air conditioning and refrigeration work (except plug-in appliances).
Check a licence: Use the NSW Government’s building and trade licence check.
Queensland
The Queensland Building and Construction Commission (QBCC) generally requires a contractor licence for building work valued over $3,300, including labour, materials and GST. Some work needs a QBCC licence at any value, including regulated plumbing and drainage, gasfitting, chemical termite management system installation and fire protection. Electrical work is licensed separately through the Electrical Safety Office.
Check a licence: Use the QBCC licensee register or, for electrical work, the Electrical Safety Office licence search.
South Australia
Consumer and Business Services (CBS) licenses contractors in South Australia. If you carry out or organise building work as a business, you generally need a building work contractor’s licence, including when you work as a subcontractor. The $20,000 figure is a separate rule for building indemnity insurance on domestic work that also needs development approval. CBS also licenses plumbers, gasfitters and electricians.
Check a licence: Use the CBS licence search.
Western Australia
Building and Energy regulates builders, electricians, plumbers and gasfitters in Western Australia. A registered building contractor is generally required if the work needs a building permit, is in the prescribed part of WA and is valued at $20,000 or more. For Class 10a work such as a shed, carport or private garage, the threshold is $50,000 or more from 1 July 2026. Some work is exempt from registration. Check permit requirements separately with your local government.
Check a licence: Use the Building and Energy licence search.
Tasmania
Consumer, Building and Occupational Services (CBOS) regulates building in Tasmania. Rather than a single dollar threshold, whether you need a licensed builder depends on Tasmania’s building work categories. Owners or competent people can do some low-risk work, but other low-risk jobs and most notifiable or permit work need a licensed builder. Check with CBOS for your specific job.
Check a licence: Use the CBOS licensed tradesperson search for builders, electricians, plumbers and gasfitters.
Northern Territory
In the Northern Territory, a registered building contractor is required for prescribed residential building work. This covers work over $25,000 in specified categories, such as a new home, an extension that increases floor area or an attached garage built at the same time as the home. Check the rules for your building control area and ask a building certifier how they apply to your job.
Check a licence: Use the Building Practitioners Board register for builders. The NT Government’s home maintenance guide links to trade licensing registers.
Australian Capital Territory
In the ACT, building work that requires building approval generally needs a builder with the right licence class to carry out or supervise it. An owner-builder licence is an option for some work. Electrical, plumbing and gasfitting work must be done by licensed tradespeople. Licences are administered through Access Canberra.
Check a licence: Use the Access Canberra public registers.
Jobs you can usually do yourself
Every state is different, but these are generally fine for an owner to do on their own home, as long as no permit is needed and the job doesn't involve electrical, plumbing, gas or structural work:
- painting, both inside and out
- replacing light globes and using plug-in appliances
- assembling and installing flat-pack furniture that doesn't need plumbing or electrical connections
- gardening and non-structural landscaping
- minor repairs such as patching small holes, replacing door handles or rehanging a cupboard door
Larger owner-builder projects are possible in most states, but they usually come with permits, training or approval requirements. Check with your state regulator before starting.
How to check a tradie before you hire them
- Ask for their licence or registration number and check it on the regulator's register listed above.
- Check the name matches. Check that the business named on your quote or contract holds any required contractor licence. Where a worker licence is required, verify that as well.
- Check the licence covers the work. Licences have classes and conditions. A builder limited to one type of work can't do everything.
- Get it in writing. Most states require written contracts above a certain value. Even below it, a written quote protects both sides.
- Ask about insurance. Larger residential jobs often require home warranty or domestic building insurance. Ask your regulator what applies.
- Keep certificates. Ask which compliance certificates are required for the work and when you’ll receive them.
Find a local tradie and check their licence
You can browse trade businesses on TradeBench. Before hiring, check the licence and its scope on the relevant regulator’s register. Tradies can claim their free basic listing to keep their details, services and base location up to date.