Paint sheens explained: flat, matt, low sheen, satin or gloss, and where to use each

A living room wall partly rolled in fresh low-sheen paint, with white gloss skirting boards, a roller tray and paint tins on a drop sheet over timber floorboards.
In this article

Picking a paint colour is the fun part. Picking the sheen is the bit that decides how your walls look up close, how well they handle grubby hands and how easily they wipe clean. Get it wrong and you might end up with ceilings that show every roller mark or a hallway that scuffs in a week.

Here's what each sheen level means, where it works best and how to choose, using guidance from Australian paint manufacturers.

What does paint sheen mean?

Dulux describes sheen as how shiny a paint is and how much light reflects from its surface. Haymes adds that sheen affects how easy the paint is to maintain and how much it shows blemishes.

Start with these general trade-offs, then check the product’s washability and recommended surfaces:

  • Lower sheens such as flat and matt reflect less light and usually hide surface imperfections better. Some matt paints are designed to be washable.

  • Higher sheens such as semi-gloss and gloss are often easy to wipe clean and tend to show surface imperfections.

Sheen can also change how a colour looks. Dulux notes that higher gloss paints are more reflective, which can make colours look lighter than the same colour in low sheen or matt. Test a sample on your actual wall before you commit.

What are the main paint sheen levels?

Names and exact gloss levels vary between brands, so treat these as a guide. The percentages below are Taubmans' published sheen levels. Other brands may differ.

Flat

Taubmans lists flat at 0–1% sheen and recommends it for ceilings only. It gives a smooth, even finish that hides roller marks and surface imperfections. It's made for surfaces where durability and frequent cleaning aren't a priority.

Matt

Matt sits at 2–4% on Taubmans' scale and suits low-traffic walls and ceilings. It helps hide uneven surfaces, but Taubmans says it marks more easily than higher sheens, so it isn't recommended for high-traffic areas. Dulux suggests matt to soften glare in hallways or rooms with large windows.

Eggshell

Eggshell is a soft, low-reflective finish. Its sheen can overlap with low sheen paint. Haymes offers a washable eggshell for living areas and hallways.

Low sheen

Low sheen is 5–8% on Taubmans’ scale and is a common choice for walls. For interiors, it balances washability and a softer finish. For exterior walls, choose a low sheen paint rated for outdoor use and suitable for your surface.

Satin

"Satin" means different things at different brands. Wattyl labels its exterior satin as semi-gloss. Haymes lists satin as its own level, with a soft glow that's more reflective than low sheen, and suggests it for doors, trims and high-traffic areas. Check the actual product when comparing quotes.

Semi-gloss

Semi-gloss is 20–30% on Taubmans' scale. Taubmans says it has good stain resistance and wipes clean easily, making it a go-to for kitchens, bathrooms and family spaces, as well as doors and trims. Dulux says its semi-gloss suits all interior surfaces, including walls, doors, trims and cupboards.

Gloss

Gloss is the shiniest finish, at 80% on Taubmans' scale. Dulux and Taubmans both describe it as hard-wearing and easy to clean, which is why it's used on doors, architraves, skirting boards and trims. The trade-off is that it shows surface imperfections, so preparation matters.

Dulux also makes a low gloss finish for doors, windows and trims. It's designed to closely match low sheen or matt walls and helps reduce the look of imperfections.

Which sheen hides imperfections best?

The flatter the paint, the better it hides flaws. Taubmans says flat hides roller marks and surface imperfections, and Haymes describes matt as excellent at hiding imperfections. Gloss is the least forgiving. Wattyl says gloss can make imperfections more visible, so good surface preparation is key.

If your walls are older, patched or uneven, a lower sheen will usually look better. If you need something tougher on uneven walls, low sheen is a common middle ground.

Which sheen is easiest to clean?

Higher sheens are generally easier to wipe down. Taubmans says semi-gloss wipes clean easily and gloss is very easy to clean, while matt marks more easily. Taubmans and Haymes both say higher traffic areas like hallways and kitchens benefit from more durable, washable finishes.

What sheen should I use in bathrooms and kitchens?

Manufacturers differ slightly here. Dulux recommends low sheen for areas that need frequent cleaning, such as kitchens, laundries and bathrooms. Taubmans suggests semi-gloss for kitchens and bathrooms. Haymes points to specialist kitchen and bathroom products, noting anti-bacterial properties in low sheen.

For humid rooms, check the label or product data sheet for where you can use the paint. For example, Dulux offers a kitchen and bathroom paint in low sheen. Check the manufacturer’s instructions for surfaces that get direct splashes.

What sheen should I use outside?

For exterior walls, Wattyl says low sheen is a great option for cladding or render, with a slight sheen that hides imperfections and cleans well. Haymes also recommends low sheen for weatherboard, timber cladding and rendered walls. Taubmans lists low sheen for interior and exterior walls.

For exterior timber trim, Wattyl recommends its Solagard Satin for extra washability and durability and suggests considering that product for coastal walls. Check the paint system is rated for your surface and exposure.

Room-by-room paint sheen guide

  • Ceilings: Flat (or matt). Hides roller marks and imperfections where frequent cleaning isn't a priority.

  • Bedrooms: Matt or low sheen. Low traffic. Matt hides flaws, while low sheen is easier to clean.

  • Living and dining rooms: Low sheen or eggshell. A balance of good looks and cleanability.

  • Hallways: Low sheen, eggshell or semi-gloss. High traffic. Dulux suggests matt to cut glare where that's a problem.

  • Kitchens: Low sheen or semi-gloss. Frequent cleaning. Consider a specialist kitchen product.

  • Bathrooms and laundries: Low sheen or semi-gloss. Moisture and cleaning. Use a product made for wet areas.

  • Family rooms: Low sheen or semi-gloss. More marks and more cleaning.

  • Doors, architraves and skirting: Semi-gloss, gloss or low gloss. Hard-wearing and easy to wipe.

  • Cupboards: Semi-gloss or gloss. Handled often.

  • Exterior walls (cladding, render, weatherboard): Exterior low sheen, or an exterior satin rated for the conditions. Hides imperfections and cleans well.

  • Exterior timber trims: Exterior satin or semi-gloss rated for timber. Extra durability and washability.

This list is a starting point based on the manufacturer guidance above. Always check the product's label and data sheet for where it can be used.

Tips for choosing a sheen

  • Think about traffic. Busy areas need tougher, more washable finishes.

  • Think about light. Look at how much glare or reflected light you get around windows and along walls, especially in a hallway or a room with large windows.

  • Match trims and walls. Semi-gloss and gloss are the usual trim choices. If you want trims closer to your walls, Dulux's low gloss is designed to match low sheen or matt wall paint.

  • Prepare the surface. The glossier the paint, the more preparation matters.

  • Sample first. Paint a test patch and look at it at different times of day.

Hiring a painter?

A painter can help you choose a sheen and prepare the surface. Browse painting businesses or paint and decorating suppliers on TradeBench and contact them directly.

Product ranges, names and sheen levels change and vary by manufacturer. Check the current product information or ask your paint supplier before you buy.

FAQs

What's the difference between matt and low sheen?

Matt usually reflects less light and hides imperfections better. Low sheen has a slight shine and is often easier to wipe clean. Check the product’s washability if you’re painting a busy room.

Is satin the same as semi-gloss?

It depends on the brand. Wattyl labels its exterior satin as semi-gloss, while Haymes lists satin and semi-gloss as separate levels. Check the product details.

What sheen is best for ceilings?

Flat is the usual choice. Taubmans recommends flat for ceilings because it hides roller marks and surface imperfections.

What sheen should I use on doors and skirting boards?

Semi-gloss or gloss are common because they're hard-wearing and easy to clean. Dulux also makes a low gloss option for doors, windows and trims.

Explore these topics

Put it into practice

Explore businesses in categories connected to this topic.

Explore the directory

Recently published businesses in these categories. Browse profiles to find the right fit.

Find businesses near your project

Choose a trade or supplier and search by their base suburb or postcode.

Run a trade or supply business?

Give people a place to discover your business, explore your services and get in touch.

List your business

Keep reading

More from Article Hub to explore next.

Browse all articles